CELS/RELS Motorized Systems

RELS-300 System

Motorized Raising and Lowering Systems for fixtures weighing up to 250 lbs.

The RELS product line is an indoor motor operated system. The system are used to raise and lower light fixtures weighing up to 250 lbs. The RELS system also includes a spring loaded brass canopy (CAN-8-65) and a 3/8″ conduit female threaded stem.

The different products within the RELS system consists of a  Disconnect Unit with 4 contacts, Motor and gear assembly, raising and lowering wire rope, and the Control Panel used for operating the system. Options include extra contacts, additional length of wire rope, and pulleys.

Also available is a CP-8 control panel. The CP-8 control panel is used instead of the individual control panel to operate up to 8 units with one panel.

See sample ordering information below for: RELS-300-45REM-4C Motorized Lowering System

  • RELS-300 -Up to 250 lb fixture
  • 45-45ft of raising and lowering cable
  • REM -Remote mounted motor and winch assembly
  • 4C -Four electrical contacts (optional up to 8 plus earth)

RELS-300-45REM-4C Motorized Lowering System for fixtures weighing up to 250 lbs. For specs,  (See attached RELS-300 specification sheet).

CP-8 Control panel to operate up to 8 systems  (See attached CP-8 specification sheets).

CELS-300 System

Motorized Raising and Lowering Systems for fixtures weighing up to 250 lbs without a canopy.

The CELS product line is an indoor motor operated system. The system is used to raise and lower light fixtures weighing up to 250 lbs. The CELS system includes a 3/4″ NPS conduit male threaded stem (optional 3/8″ conduit female threaded stem).

The different products within the CELS system consists of a  Disconnect Unit with 4 contacts, Motor and gear assembly, raising and lowering wire rope, and the Control Panel used for operating the system. Options include extra contacts, additional length of wire rope, 3/8″ female stem, and pulleys.

Also available is a CP-8 control panel. The CP-8 control panel is used instead of the individual control panel, to operate up to 8 motor units with one panel.

See sample ordering information below for: CELS-300-45REM-4C-38 Motorized Lowering System

  • CELS-300 -Up to 250 lb fixture
  • 45-45ft of raising and lowering cable
  • REM -Remote mounted motor and winch assembly
  • 4C -Four electrical contacts (optional up to 8 plus earth)
  • 38 – Optional 3/8″ NPS female threaded stem instead of 3/4″NPS male.

CELS-300-45REM-4C Motorized Lowering System for fixtures weighing up to 250 lbs. For specs, (See attached CELS-300 specification sheet).

CP-8 Control panel to operate up to 8 systems (See attached CP-8 specification sheets).